TIG-347L/ER347L

TIG-347L													Classification: YB/T5092 H022Cr20Ni10Nb AWS A5.9 ER347L AWS A5.9M ER347L ENISO14343-A: W(19 9 Nb) ENISO14343-B: SS347L
Stainless Steel TIG Solid Wire
Low Carbon Stabilized Austenitic Alloy
Application:
For joining low carbon stabilized 19Cr-11Ni-Nb (SUS347) grade stainless austenitic steels commonly used in petrochemical facilities, pressure vessels, food and medical equipment, etc
Characteristics:
1. lncreased content of niobium decreases the likelihood of intergranular chromium carbide precipitation and therefore vulnerability to intergranular corrosion; 2.Stable arc.less spattering,good bead appearance.
Polarity:
DC-
Welding Position:
Typical Chemical Composition of Weld Metal:
Alloy wt%			C		Mn		Si		Cr		Ni		Mo		N		P		S		Cu
YB/T			0.03		0.5-2.0		0.90		21.5-23.5		7.5-9.5		2.5-3.5		0.08-0.20		0.03		0.030		0.75
AWS			0.03		0.5-2.0		0.90		21.5-23.5		7.5-9.5		2.5-3.5		0.08-0.20		0.03		0.030		0.75
EXP			0.015		1.84		0.50		22.60		8.71		3.03		0.15		0.013		0.011		0.11
Typical Mechanical Properties of Weld Metal:
Mechanica properties				Y.S.(MPa)			T.S.(MPa)				EI(%)			CVN(J/℃)					FN
YB/T				-			-				-			-					-
AWS				-			-				-			-					-
EXP				-			800				32			125/-40					41
Notes on usage:
1. Shielding gas: 100% Ar; 2.Shielding gas flow rate: 10-15 l/min; 3. Arc length should be kept between 1-3 mm; 4.Interpass temperature: ≤150℃; 5. Prior to welding, base metal surfaces should be cleaned of grease, oil and corrosion contamination; 6. Take proper protection against wind to prevent blowholes when welding outdoors.