SSC-316LT/E316LT1-1/4

SSC-316LT													Классификации: AWS A5.22 E316LT1-1/4 AWS A5.22M E316LT1-1/4 EN ISO 17633-A: T 19 12 3 L P C1/M21 1 ENISO 17633-B:TS 316L-F C1/M21 1
Flux Cored Wire For Stainless Steel
Austenitic Type -196℃ Super Low Temperature Steel
Применение:
Suitable for welding on 18%Cr-12%Ni-2%Mo stainless steel(SUS316、SUS316L) in petro-chemistry,pressure vessel, food machinery, medical machinery, chemical fertilizer and etc.
Характеристики:
1. There is appropriate amount of ferrite in deposit metal so the sensitivity of crack is low; 2. Content of Mo is higher so the corrosion resistance is great; 3. SSC-316LT can be welded at all position and impact value at -196℃ of deposit metal is excellent. SSC-316LT is suitable for low-temp.instruments, tanks and containers; 4. Stable and gentle arc, low spatters, beautiful weld bead, good slag-removal, feeding stably excellentwelding process.
Полярность:
DC+
Положение сварки:
Типичное химическое составление сварного металла:
Сплав wt%			C		Mn		Si		Cr		Ni		Mo		P		S		Cu
AWS			0.04		0.5-2.5		1.00		17.0-20.0		11.0-14.0		2.0-3.0		0.040		0.030		0.75
SSC-316LT			0.018		1.30		0.51		17.50		12.00		2.50		0.020		0.003		0.01
Типичные механические свойства сварного металла:
Mechanica properties				Y.S.(MPa)			T.S.(MPa)				EI(%)			CVN(J/℃)			PWHT(℃xh)
AWS				-			485				30			-			-
SSC-316LT				-			560				40			34/-196			-
Размеры, доступные и рекомендуемые параметры:
Диаметр/mm						1.2					1.4					1.6
Напряжение						20-36					-					24-38
Amp						120-260					-					200-300
Stick-Out (mm)						15-25					-					18-25
Gas Flow (I/min)						15-25					-					15-25
Замечания по использованию:
1. Shielding gas: 75~80%Ar+CO₂/100% CO₂; 2. Preheating and interpass temperature: 16~100℃; 3. Take proper protection against wind to prevent blowholes when welding outdoors.